Superb job! Love the rear lights and the paint work looks amazing, I can appreciate the time and effort that goes into the measuring, marking and masking of stripes having just gone through the proces ...
I failed a Brands Hatch track day noise test with my Tyga pipes and drilled air box lid. Static was just inside the limit of 102 with a result of 100db at 7000rpm. But the drive by was 96db when shoul ...
I have tried laquer/clear coat and clear powder coat on refurbed fork legs, both end up deteriorating in fairly short order and look just as bad as the original finish. My 28 restoration I left them b ...
How much of an improvement is hard to say exactly as I don't have a noise meter and didn't run it before and after replacement but I know from previous experience with motocross bikes it should make a ...
I failed a Brands Hatch track day noise test with my Tyga pipes and drilled air box lid. Static was just inside the limit of 102 with a result of 100db at 7000rpm. But the drive by was 96db when shoul ...
Great project. With those fasteners for replating I would recommend cleaning them up with a wire wheel before you send them away, especially any corroded ones. The better you prep them the better fini ...
Yes and no! In common with NF5 and NX5 cranks the NSR cranks were designed as a consumable part so Honda never sold rebuild kits but they are rebuildable to a p ...
Mine has stuck open, I’m sure. Warms up to 60 degrees nicely through town, but drops off scale when speeding up.
Not worried if not new - do you think yours works ok?
Thanks Steve.
Can anyone help with where I can get a new thermostat for my mc21?
I notice they’re not available from Honda, was (is) the same one used on other models?
Thanks.
Do you just need a thermostat or di ...
Search found 798 matches • Page 1 of 54Goto page 1, 2, 3 ... 52, 53, 54Next